NDT applicable Standards and Procedures

• NFPA 1914, Standard for Testing Fire Department Aerial Devices.

• API 1104, API Standard 1104 Welding of Pipelines and Related Facilities.

Relevant NDT ASTM Standards. ASTM American Society for Testing and Materials www.astm.org

• A577/A577M, Standard Specification for Ultrasonic Angle-Beam Examination of Steel Plates.

• A578/A578M, Standard Specification for Straight-Beam Ultrasonic Examination of Plain and Clad Steel Plates for Special Applications.

• A745/A745M, Standard Practice for Ultrasonic Examination of Austenitic Steel Forgings.

• A898/A898M, Standard Specification for Straight Beam Ultrasonic Examination of Rolled Steel Structural Shapes.

• A880, Standard Practice for Criteria for Use in Evaluation of Testing Laboratories and Organizations for Examination and Inspection of Steel, Stainless Steel, and Related Alloys.

• B 244, Measurement of Thickness of Anodic Coatings on Aluminum and Other Nonconductive Coatings on Nonmagnetic Basis Metals with Eddy-Current Instruments.

• B 499, Measurement of Coating Thickness by the Magnetic Method: Nonmagnetic Coatings on Magnetic Base Metals.

• B 457, Standard Test Method for Measurement of Impedance of Anodic Coatings on Aluminum.

• B 548, Standard Test Method for Ultrasonic Inspection of Aluminum-Alloy Plate for Pressure Vessels.

• B 594, Standard Practice for Ultrasonic Inspection of Aluminum-Alloy Wrought Products for Aerospace Applications.

• B 773, Standard Guide for Ultrasonic C-Scan Bond Evaluation of Brazed or Welded Electrical Contact Assemblies.

• C 1175, Standard Guide to Test Methods and Standards for Nondestructive Testing of Advanced Ceramics.

• C 1331, Standard Test Method for Measuring Ultrasonic Velocity in Advanced Ceramics with Broadband Pulse-Echo Cross-Correlation Method.

• C 1332, Standard Test Method for Measurement of Ultrasonic Attenuation Coefficients of Advanced Ceramics by Pulse-Echo Contact Technique.

• C 1383, Standard Test Method for Measuring the P-Wave Speed and the Thickness of Concrete Plates Using the Impact-Echo Method.

• C 805, Standard Test Method for Rebound Number of Hardened Concrete.

• C 597, Standard Test Method for Pulse Velocity Through Concrete.

• D1186, Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to a Ferrous Base.

• D1400, Nondestructive Measurement of Dry Film Thickness of Nonconductive Coatings Applied to a Nonferrous Metal Base.

• D 4015, Standard Test Methods for Modulus and Damping of Soils by the Resonant-Column Method.

• D 4602, Standard Guide for Nondestructive Testing of Pavements Using Cyclic-Loading Dynamic Deflection Equipment.

• D 5339, Standard Practice for Quality Assurance Plan for Structural Steel Fabrication for Highway Structures.

• D 5641, Standard Practice for Geomembrane Seam Evaluation by Vacuum Chamber.

• D 5820, Standard Practice for Pressurized Air Channel Evaluation of Dual Seamed Geomembranes.

• D 5858, Standard Guide for Calculating In Situ Equivalent Elastic Moduli of Pavement Materials Using Layered Elastic Theory.

• D 6087, Standard Test Method for Evaluating Asphalt-Covered Concrete Bridge Decks Using Ground Penetrating Radar.

• D 6365, Standard Practice for the Nondestructive Testing of Geomembrane Seams using the Spark Tests.

• E 94, Standard Guide for Radiographic Examination.

• E 114, Standard Practice for Ultrasonic Pulse-Echo Straight-Beam Examination by the Contact Method.

• E 125, Standard Reference Photographs for Magnetic Particle Indications on Ferrous Castings.

• E 127, Standard Practice for Fabricating and Checking Aluminum Alloy Ultrasonic Standard Reference Blocks.

• E 142, Standard Method for Controlling Quality of Radiographic Testing.

• E 155, Standard Reference Radiographs for Inspection of Aluminum and Magnesium Castings.

• E 164, Standard Practice for Ultrasonic Contact Examination of Weldments.

• E 165, Standard Test Method for Liquid Penetrant Examination.

• E 186, Standard Reference Radiographs for Heavy-Walled (2 to 4 1/2-in. (51 to 114-mm)) Steel Castings.

• E 192, Standard Reference Radiographs for Investment Steel Castings of Aerospace Applications.

• E 213, Standard Practice for Ultrasonic Examination of Metal Pipe and Tubing.

• E 214, Standard Practice for Immersed Ultrasonic Examination by the Reflection Method Using Pulsed Longitudinal Waves.

• E 215, Standard Practice for Standardizing Equipment for Electromagnetic Examination of Seamless Aluminum-Alloy Tube.

• E 242, Standard Reference Radiographs for Appearances of Radiographic Images as Certain Parameters Are Changed.

• E 243, Standard Practice for Electromagnetic (Eddy-Current) Examination of Copper and Copper-Alloy Tubes.

• E272, Standard Reference Radiographs for High-Strength Copper-Base and Nickel-Copper Alloy Castings.

• E 273, Standard Practice for Ultrasonic Examination of the Weld Zone of Welded Pipe and Tubing.

• E 280, Standard Reference Radiographs for Heavy-Walled (4 1/2 to 12-in. (114 to 305-mm)) Steel Castings.

• E 309, Standard Practice for Eddy-Current Examination of Steel Tubular Products Using Magnetic Saturation.

• E 310, Standard Reference Radiographs for Tin Bronze Castings.

• E 317, Standard Practice for Evaluating Performance Characteristics of Ultrasonic Pulse- Echo Examination Instruments and Systems Without the Use of Electronic Measurement Instruments.

• E 329, Standard Specification for Agencies Engaged in the Testing and/or Inspection of Materials Used in Construction.

• E 376, Standard Practice for Measuring Coating Thickness by Magnetic-Field or Eddy-Current (Electromagnetic) Test Methods.

• E 390, Standard Reference Radiographs for Steel Fusion Welds.

• E 408, Standard Test Methods for Total Normal Emittance of Surfaces Using Inspection-Meter Techniques.

• E 426, Standard Practice for Electromagnetic (Eddy-Current) Examination of Seamless and Welded Tubular Products, Austenitic Stainless Steel and Similar Alloys.

• E 427, Standard Practice for Testing for Leaks Using the Halogen Leak Detector (Alkali-Ion Diode).

• E 428, Standard Practice for Fabrication and Control of Steel Reference Blocks Used in Ultrasonic Examination.

• E 431, Standard Guide to Interpretation of Radiographs of Semiconductors and Related Devices.

• E 432, Standard Guide for Selection of a Leak Testing Method.

• E 433, Standard Reference Photographs for Liquid Penetrant Inspection.

• E 446, Standard Reference Radiographs for Steel Castings Up to 2 in. (51 mm) in Thickness.

• E 479, Standard Guide for Preparation of a Leak Testing Specification.

• E 493, Standard Test Methods for Leaks Using the Mass Spectrometer Leak Detector in the Inside-Out Testing Mode.

• E 494, Standard Practice for Measuring Ultrasonic Velocity in Materials.

• E 498, Standard Test Methods for Leaks Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Tracer Probe Mode.

• E 499, Standard Test Methods for Leaks Using the Mass Spectrometer Leak Detector in the Detector Probe Mode.

• E 505, Standard Reference Radiographs for Inspection of Aluminum and Magnesium Die Castings.

• E 515, Standard Test Method for Leaks Using Bubble Emission Techniques.

• E 543, Standard Practice for Agencies Performing Nondestructive Testing.

• E 545, Standard Test Method for Determining Image Quality in Direct Thermal Neutron Radiographic Examination.

• E 566, Standard Practice for Electromagnetic (Eddy-Current) Sorting of Ferrous Metals.

• E 569, Standard Practice for Acoustic Emission Monitoring of Structures During Controlled Stimulation.

• E 570, Standard Practice for Flux Leakage Examination of Ferromagnetic Steel Tubular Products.

• E 571, Standard Practice for Electromagnetic (Eddy-Current) Examination of Nickel and Nickel Alloy Tubular Products.

• E 587, Standard Practice for Ultrasonic Angle-Beam Examination by the Contact Method.

• E 588, Standard Practice for Detection of Large Inclusions in Bearing Quality Steel by the Ultrasonic Method.

• E 592, Standard Guide to Obtainable ASTM Equivalent Penetrameter Sensitivity for Radiography of Steel Plates 1/4 to 2 in. (6 to 51 mm) Thick with X-Rays and 1 to 6 in. (25 to 152 mm) Thick with Cobalt-60.

• E 650, Standard Guide for Mounting Piezoelectric Acoustic Emission Sensors.

• E 664, Standard Practice for the Measurement of the Apparent Attenuation of Longitudinal Ultrasonic Waves by Immersion Method.

• E 689, Standard Reference Radiographs for Ductile Iron Castings.

• E 690, Standard Practice for In Situ Electromagnetic (Eddy-Current) Examination of Nonmagnetic Heat Exchanger Tubes.

• E 703, Standard Practice for Electromagnetic (Eddy-Current) Sorting of Nonferrous Metals.

• E 709 Standard Guide for Magnetic Particle Examination.

• E 746, Standard Test Method for Determining Relative Image Quality Response of Industrial Radiographic Film.

• E 747, Standard Practice for Design, Manufacture, and Material Grouping Classification of IQI.

• E 748, Standard Practices for Thermal Neutron Radiography of Materials.

• E 749, Standard Practice for Acoustic Emission Monitoring During Continuous Welding.

• E 750, Standard Practice for Characterizing Acoustic Emission Instrumentation.

• E 751, Standard Practice for Acoustic Emission Monitoring During Resistance Spot-Welding.

• E 797, Standard Practice for Measuring Thickness by Manual Ultrasonic Pulse-Echo Contact Method.

• E 801, Standard Practice for Controlling Quality of Radiological Examination of Electronic Devices.

• E 802, Standard Reference Radiographs for Gray Iron Castings Up to 4 1/2 in. (114 mm) in Thickness.

• E 803, Standard Test Method for Determining the L/D Ratio of Neutron Radiography Beams.

• E 908, Standard Practice for Calibrating Gaseous Reference Leaks.

• E 976, Standard Guide for Determining the Reproducibility of Acoustic Emission Sensor Response.

• E 977, Standard Practice for Thermoelectric Sorting of Electrically Conductive Materials.

• E 998, Standard Test Method for Structural Performance of Glass in Windows, Curtain Walls, and Doors Under the Influence of Uniform Static Loads by Nondestructive Method.

• E 999, Standard Guide for Controlling the Quality of Industrial Radiographic Film Processing.

• E 1001, Standard Practice for Detection and Evaluation of Discontinuities by the Immersed Pulse-Echo Ultrasonic Method Using Longitudinal Waves.

• E 1002, Standard Test Method for Leaks Using Ultrasonics.

• E 1003, Standard Test Method for Hydrostatic Leak Testing.

• E 1004, Standard Practice for Determining Electrical Conductivity Using the Electromagnetic (Eddy-Current) Method.

• E 1025, Standard Practice for Design, Manufacture, and Material Grouping Classification of Hole-Type Image Quality Indicators (IQI) used for Radiology.

• E 1030, Standard Test Method for Radiographic Examination of Metallic Castings.

• E 1032, Standard Test Method for Radiographic Examination of Weldments.

• E 1033, Standard Practice for Electromagnetic (Eddy-Current) Examination of Type F-Continuously Welded (CW) Ferromagnetic Pipe and Tubing Above the Curie Temperature.

• E 1065, Standard Guide for Evaluating Characteristics of Ultrasonic Search Units.

• E 1066, Standard Test Method for Ammonia Colorimetric Leak Testing.

• E 1067, Standard Practice for Acoustic Emission Examination of Fiberglass Reinforced Plastic Resin (FRP) Tanks/Vessels.

• E 1079, Standard Practice for Calibration of Transmission Densitometers.

• E 1106, Standard Method for Primary Calibration of Acoustic Emission Sensors.

• E 1114, Standard Test Method for Determining the Focal Size of Iridium-192 Industrial Radiographic Sources.

• E 1118, Standard Practice for Acoustic Emission Examination of Reinforced Thermosetting Resin Pipe (RTRP).

• E 1135, Standard Test Method for Comparing the Brightness of Fluorescent Penetrants.

• E 1139, Standard Practice for Continuous Monitoring of Acoustic Emission from Metal Pressure Boundaries.

• E 1158, Standard Guide for Material Selection and Fabrication of Reference Blocks for the Pulsed Longitudinal Wave Ultrasonic Examination of Metal and Metal Alloy Production Material.

• E 1161, Standard Test Method for Radiologic Examination of Semiconductors and Electronic Components.

• E 1165, Standard Test Method for Measurement of Focal Spots of Industrial X-Ray Tubes by Pinhole Imaging.

• E 1208, Standard Test Method for Fluorescent Liquid Penetrant Examination Using the Lipophilic Post-Emulsification Process.

• E 1209, Standard Test Method for Fluorescent Liquid Penetrant Examination Using the Water-Washable Process.

• E 1210, Standard Test Method for Fluorescent Liquid Penetrant Examination Using the Hydrophilic Post-Emulsification Process.

• E 1211, Standard Practice for Leak Detection and Location Using Surface-Mounted Acoustic Emission Sensors.

• E 1212, Standard Practice for Quality Control Systems for Nondestructive Testing Agencies.

• E 1213, Standard Test Method for Minimum Resolvable Temperature Difference for Thermal Imaging Systems.

• E 1219, Standard Test Method for Fluorescent Liquid Penetrant Examination Using the Solvent-Removable Process.

• E 1220, Standard Test Method for Visible Penetrant Examination Using the Solvent-Removable Process.

• E 1254, Standard Guide for Storage of Radiographs and Unexposed Industrial Radiographic Films.

• E 1255, Standard Practice for Radioscopy E1316, Standard Terminology for Nondestructive Examinations.

• E 1311, Standard Test Method for Minimum Detectable Temperature Difference for Thermal Imaging Systems.

• E 1312, Standard Practice for Electromagnetic (Eddy-Current) Examination of Ferromagnetic Cylindrical Bar Product Above the Curie Temperature.

• E 1315, Standard Practice for Ultrasonic Examination of Steel with Convex Cylindrically Curved Entry Surfaces.

• E 1316, Standard Terminology for Nondestructive Examinations.

• E 1320, Standard Reference Radiographs for Titanium Castings.

• E 1324, Standard Guide for Measuring Some Electronic Characteristics of Ultrasonic Examination Instruments.

• E 1359, Standard Guide for Evaluating Capabilities of Nondestructive Testing Agencies.

• E 1390, Standard Guide for Illuminators Used for Viewing Industrial Radiographs.

• E 1411, Standard Practice for Qualification of Radioscopic Systems.

• E 1416, Standard Test Method for Radioscopic Examination of Weldments.

• E 1417, Standard Practice for Liquid Penetrant Examination.

• E 1418, Standard Test Method for Visible Penetrant Examination Using the Water-Washable Process.

• E 1419, Standard Test Method for Examination of Seamless, Gas- Filled, Pressure Vessels Using Acoustic Emission.

• E 1441, Standard Guide for Computed Tomography (CT) Imaging.

• E 1444, Standard Practice for Magnetic Particle Examination.

• E 1452, Standard Practice for Preparation of Calibration Solutions for Spectrophotometric and for Spectroscopic Atomic Analysis.

• E 1453, Standard Guide for Storage of Media That Contains Analog or Digital Radioscopic Data.

• E 1454, Standard Guide for Data Fields for Computerized Transfer of Digital Ultrasonic Testing Data

• E 1475, Standard Guide for Data Fields for Computerized Transfer of Digital Radiological Test Data.

• E 1476, Standard Guide for Metals Identification, Grade Verification, and Sorting.

• E 1495, Standard Guide for Acousto-Ultrasonic Assessment of Composites, Laminates, and Bonded Joints.

• E 1496, Standard Test Method for Neutron Radiographic Dimensional Measurements.

• E 1543, Standard Test Method for Noise Equivalent Temperature Difference of Thermal Imaging Systems.

• E 1570, Standard Practice for Computed Tomographic (CT) Examination.

• E 1571, Standard Practice for Electromagnetic Examination of Ferromagnetic Steel Wire Rope.

• E 1603, Standard Test Methods for Leakage Measurement Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Hood Mode.

• E 1606, Standard Practice for Electromagnetic (Eddy-Current) Examination of Copper Redraw Rod for Electrical Purposes.

• E 1629, Standard Practice for Determining the Impedance of Absolute Eddy-Current Probes.

• E 1647, Standard Practice for Determining Contrast Sensitivity in Radioscopy.

• E 1648, Standard Reference Radiographs for Examination of Aluminum Fusion Welds.

• E 1672, Standard Guide for Computed Tomography (CT) System Selection.

• E 1695, Standard Test Method for Measurement of Computed Tomography (CT) System Performance.

• E 1734, Standard Practice for Radioscopic Examination of Castings.

• E 1735, Standard Test Method for Determining Relative Image Quality of Industrial Radiographic Film Exposed to X-Radiation from 4 to 25 MV.

• E 1736, Standard Practice for Acousto-Ultrasonic Assessment of Filament-Wound Pressure Vessels.

• E 1742, Standard Practice for Radiographic Examination.

• E 1774, Standard Guide for Electromagnetic Acoustic Transducers (EMATs).

• E 1781, Standard Practice for Secondary Calibration of Acoustic Emission Sensors.

• E 1814, Standard Practice for Computed Tomographic (CT) Examination of Castings.

• E 1815, Standard Test Method for Classification of Film Systems for Industrial Radiography.

• E 1816, Standard Practice for Ultrasonic Examinations Using Electromagnetic Acoustic Transducer (EMAT) Techniques.

• E 1817, Standard Practice for Controlling Quality of Radiological Examination by Using Representative Quality Indicators (RQIs)

• E 1862-97(2002)e1 Standard Test Methods for Measuring and Compensating for Reflected Temperature Using Infrared Imaging Radiometers.

• E 1888, Standard Test Method for Acoustic Emission testing of Pressurized Containers Made of Fiberglass Reinforced Plastic with Balsa Wood Cores.

• E 1897, Standard Test Methods for Measuring and Compensating for Transmittance of an Attenuating Medium Using Infrared Imaging.

• E 1901, Standard Guide for Detection and Evaluation of Discontinuities by Contact Pulse-Echo Straight-Beam Ultrasonic Methods.

• E 1930, Standard Test Method for Examination of Liquid Filled Atmospheric and Low Pressure Metal Storage Tanks Using Acoustic Emission.

• E 1931, Standard Guide for X-Ray Compton Scatter Tomography.

• E 1932, Standard Guide for Acoustic Emission Examination of Small Parts.

• E 1933, Standard Test Methods for Measuring and Compensating for Emissivity Using Infrared Imaging Radiometers.

• E 1934, Standard Guide for Examining Electrical and Mechanical Equipment with Infrared Thermography.

• E 1935, Standard Test Method for Calibrating and Meausring CT Density.

• E 1936, Standard Reference Radiograph for Evaluating the Performance of Radiographic Digitization Systems.

• E 1955, Standard Radiographic Examination for Soundness of Welds in Steel by Comparison to Graded ASTM E 390 Reference Radiographs.

• E 1961, Standard Practice for Mechanized Ultrasonic Examination of Girth Welds Using Zonal Discrimination with Focused Search Units.

• E 1962, Standard Test Method for Ultrasonic Surface Examinations Using Electromagnetic Acoustic Transducer (EMAT) Techniques.

• E 2001, Standard Guide for Resonant Ultrasound Spectroscopy for Defect Detection in Both Metallic and Non-Metallic Parts.

• E 2002, Standard Practice for Determining Total Image Unsharpness in Radiology.

• E 2003, Standard Practice for Fabrication of the Neutron Radiographic Beam Purity Indicators.

• E 2023, Standard Practice for Fabrication of Neutron Radiographic Sensitivity Indicators.

• E 2024, Standard Test Methods for Atmospheric Leaks Using a Thermal Conductivity Leak Detector.

• E 2033, Standard Practice for Computed Radiology (Photostimulable Luminescence Method).

• E 2075, Standard Practice for Verifying the Consistency of AE-Sensor Response Using an Acrylic Rod.

• E 2076, Standard Test Method for Examination of Fiberglass Reinforced Plastic Fan Blades Using Acoustic Emission.

• E 2096, Standard Practice for In Situ Examination of Ferromagnetic Heat-Exchanger Tubes Using Remote Field Testing.

• E 2104, Standard Practice for Radiographic Examination of Advanced Aero and Turbine Materials and Components.

• E 2191, Standard Test Method for Examination of Gas-Filled Filament-Wound Composite Pressure Vessels Using Acoustic Emission.

• E 2192, Standard Guide for Planar Flaw Height Sizing by Ultrasonics.

• E 2223, Standard Practice for Examination of Seamless, Gas-Filled, Steel Pressure Vessels Using Angle Beam Ultrasonic.

• F 629, Standard Practice for Radiography of Cast Metallic Surgical Implants.

• F 846, Standard Guide for Testing Performance of Amusement Rides and Devices.

• F 914, Standard Test Method for Acoustic Emission for Insulated Aerial Personnel Devices.

• F 1430, Standard Test Method for Acoustic Emission Testing of Insulated Aerial Personnel Devices with Supplemental Load Handling Attachments

• F 1469, Standard Guide for Conducting a Repeatability and Reproducibility Study on Test Equipment for Nondestructive Testing.

• F 1512, Standard Practice for Ultrasonic C-Scan Bond Evaluation of Sputtering Target-Backing Plate Assemblies.

• F 1797, Standard Test Method for Acoustic Emission Testing of Insulated Digger Derricks.

• G 62, Standard Test Methods for Holiday Detection in Pipeline Coatings.

• G 158, Standard Guide for Three Methods of Assessing Buried Steel Tanks.

• R0027- Standards Related to Nondestructive Testing Developed by ASTM Committees Other Than Committee E-7 (This is not an ASTM standard)

 

Relevant NDT AWS Specifications. AWS American Welding Society. www.aws.org

• A2.1-DC & WC Welding Symbols Chart

• A3.0:2001 Standard Welding Terms and Definitions

• ARE-6 Test Methods for Evaluating Welded Joints

• B1.10:1999 Guide for the Nondestructive Examination of Welds

• B1.11:2000 Guide for the Visual Examination of Welds

• B5.2:2001 Specification for the Qualification of Welding Inspector Specialists and Welding Inspector Assistants

• C3.3-80R Recommended Practices for Design, Manufacture, and Inspection of Critical Brazed Components

• C3.8-90R Recommended Practices for Ultrasonic Inspection of Brazed Joints

• CM-2000 Certification Manual for Welding Inspectors

• D1.1/D1.1M:2002 D1.1 Structural Welding Code-Steel

o D1.1-2000Ultrasonic Examination

o D1.1-2000 and AWS D1.5-96 Radiographic Examination

• QC1-96 Standard for AWS Certification of Welding Inspectors

 

Relevant NDT ISO Specifications. ISO International Organization for Standardization. www.iso.org

19.100 Non-destructive testing

• ISO/TTA 3, Polycrystalline materials -- Determination of residual stresses by neutron diffraction.

• ISO 1027, Radiographic image quality indicators for non-destructive testing -- Principles and identification.

• ISO 3057, Non-destructive testing -- Metallographic replica techniques of surface examination.

• ISO 3058, Non-destructive testing -- Aids to visual inspection -- Selection of low-power magnifiers.

• ISO 3059, Non-destructive testing -- Penetrant testing and magnetic particle testing - Viewing conditions.

• ISO 3452, Non-destructive testing -- Penetrant inspection --General principles.

• ISO 3452-2, Non-destructive testing -- Penetrant testing -- Part 2: Testing of penetrant materials.

• ISO 3452-3, Non-destructive testing -- Penetrant testing -- Part 3: Reference test blocks.

• ISO 3452-4, Non-destructive testing -- Penetrant testing -- Part 4: Equipment.

• ISO 3453, Non-destructive testing -- Liquid penetrant inspection -- Means of verification.

• ISO 3999, Apparatus for gamma radiography -- Specification.

• ISO 3999-1, Radiation protection -- Apparatus for industrial gamma radiography -- Part 1: Specifications for performance, design and tests.

• ISO 5576, Non-destructive testing -- Industrial X-ray and gamma-ray radiology -- Vocabulary.

• ISO 5577, Non-destructive testing -- Ultrasonic inspection -- Vocabulary.

• ISO 5580, Non-destructive testing -- Industrial radiographic illuminators -- Minimum requirements.

• ISO 9712, Non-destructive testing -- Qualification and certification of personnel.

• ISO 9934-1, Non-destructive testing -- Magnetic particle testing -- Part 1: General principles.

• ISO 9934-3, Non-destructive testing -- Magnetic particle testing -- Part 3: Equipment.

• ISO 9935, Non-destructive testing -- Penetrant flaw detectors -- General technical requirements.

• ISO 10375, Non-destructive testing -- Ultrasonic inspection - - Characterization of search unit and sound field.

• ISO 11537, Non-destructive testing -- Thermal neutron radiographic testing -- General principles and basic rules.

• ISO 12706, Non-destructive testing -- Terminology - Terms used in penetrant testing.

• ISO 12710, Non-destructive testing -- Ultrasonic inspection --Evaluating electronic characteristics of ultrasonic test instruments.

• ISO 12713, Non-destructive testing -- Acoustic emission inspection -- Primary calibration of transducers.

• ISO 12714, Non-destructive testing -- Acoustic emission inspection -- Secondary calibration of acoustic emission sensors.

• ISO 12715, Ultrasonic non-destructive testing -- Reference blocks and test procedures for the characterization of contact search unit beam profiles.

• ISO 12716, Non-destructive testing -- Acoustic emission inspection -- Vocabulary.

• ISO 12721, Non-destructive testing -- Thermal neutron radiographic testing -- Determination of beam L/D ratio.

• ISO 15708-1, Non-destructive testing -- Radiation methods -- Computed tomography -- Part 1: Principles.

• ISO 15708-2, Non-destructive testing -- Radiation methods -- Computed tomography -- Part 2: Examination practices.

37.040.25 Radiographic films.

• ISO 11699-1, Non-destructive testing -- Industrial radiographic films -- Part 1: Classification of film systems for industrial radiography.

• ISO 11699-2, Non-destructive testing -- Industrial radiographic films -- Part 2: Control of film processing by means of reference values.

77.040.20 Non-destructive testing of metals.

• ISO 4986, Steel castings -- Magnetic particle inspection.

• ISO 4987, Steel castings -- Penetrant inspection.

• ISO 4993, Steel castings -- Radiographic inspection.

• ISO 5579, Non-destructive testing -- Radiographic examination of metallic materials by X- and gamma rays -- Basic rules.

• ISO 5948, Railway rolling stock material -- Ultrasonic acceptance testing.

• ISO 6933, Railway rolling stock material -- Magnetic particle acceptance testing.

• ISO 9302, Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes -- electromagnetic testing for verification of hydraulic leak-tightness.

• ISO 9303, Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes -- Full peripheral ultrasonic testing for the detection of longitudinal imperfections.

• ISO 9304, Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes -- Eddy current testing for the detection of imperfections.

• ISO 9305, Seamless steel tubes for pressure purposes -- Full peripheral ultrasonic testing for the detection of transverse imperfections.

• ISO 9402, Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes -- Full peripheral magnetic transducer/flux leakage testing of ferromagnetic steel tubes for the detection of longitudinal imperfections.

• ISO 9598, Seamless steel tubes for pressure purposes -- Full peripheral magnetic transducer/flux leakage testing of ferromagnetic steel tubes for the detection of transverse imperfections.

• ISO 9915, Aluminium alloy castings -- Radiography testing.

• ISO 9916, Aluminium alloy and magnesium alloy castings -- Liquid penetrant inspection.

• ISO 10049, Aluminium alloy castings -- Visual method for assessing the porosity.

• ISO 10124, Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes -- Ultrasonic testing for the detection of laminar imperfections.

• ISO 10332, Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes -- Ultrasonic testing for the verification of hydraulic leak-tightness.

• ISO 10543, Seamless and hot-stretch-reduced welded steel tubes for pressure purposes -- Full peripheral ultrasonic thickness testing.

• ISO 11484, Steel tubes for pressure purposes -- Qualification and certification of non-destructive testing (NDT) personnel.

• ISO 11496, Seamless and welded steel tubes for pressure purposes -- Ultrasonic testing of tube ends for the detection of laminar imperfections.

• ISO 11971, Visual examination of surface quality of steel castings.

• ISO 12094, Welded steel tubes for pressure purposes -- Ultrasonic testing for the detection of laminar imperfections in strips/plates used in the manufacture of welded tubes.

• ISO 12095, Seamless and welded steel tubes for pressure purposes -- Liquid penetrant testing.

• ISO 13664, Seamless and welded steel tubes for pressure purposes -- Magnetic particle inspection of the tube ends for the detection of laminar imperfections.

• ISO 13665, Seamless and welded steel tubes for pressure purposes -- Magnetic particle inspection of the tube body for the detection of surface imperfections.

25.160.40 Welded joints and welds Including welding position and mechanical and non-destructive testing of welded joints.

• ISO 1106-1, Recommended practice for radiographic examination of fusion welded joints -- Part 1: Fusion welded butt joints in steel plates up to 50 mm thick.

• ISO 1106-2, Recommended practice for radiographic examination of fusion welded joints -- Part 2: Fusion welded butt joints in steel plates thicker than 50 mm and up to and including 200 mm in thickness.

• ISO 1106-3, Recommended practice for radiographic examination of fusion welded joints -- Part 3: Fusion welded circumferential joints in steel pipes of up to 50 mm wall thickness.

• ISO 2400, Welds in steel -- Reference block for the calibration of equipment for ultrasonic examination.

• ISO 2437, Recommended practice for the X-ray inspection of fusion welded butt joints for aluminium and its alloys and magnesium and its alloys 5 to 50 mm thick.

• ISO 2504, Radiography of welds and viewing conditions for films -- Utilization of recommended patterns of image quality indicators (I.Q.I.).

• ISO 5817, Arc-welded joints in steel -- Guidance on quality levels for imperfections.

• ISO 6520-1, Welding and allied processes -- Classification of geometric imperfections in metallic materials -- Part 1: Fusion welding.

• ISO 6520-2, Welding and allied processes -- Classification of geometric imperfections in metallic materials -- Part 2: Welding with pressure.

• ISO 7963, Welds in steel -- Calibration block No. 2 for ultrasonic examination of welds.

• ISO 9015-1, Destructive tests on welds in metallic materials -- Hardness testing -- Part 1: Hardness test on arc welded joints.

• ISO 9764, Electric resistance and induction welded steel tubes for pressure purposes -- Ultrasonic testing of the weld seam for the detection of longitudinal imperfections.

• ISO 9765, Submerged arc-welded steel tubes for pressure purposes -- Ultrasonic testing of the weld seam for the detection of longitudinal and/or transverse imperfections.

• ISO 10042, Arc-welded joints in aluminium and its weldable alloys --Guidance on quality levels for imperfections.

• ISO 12096, Submerged arc-welded steel tubes for pressure purposes -- Radiographic testing of the weld seam for the detection of imperfections.

• ISO 13663, Welded steel tubes for pressure purposes -- Ultrasonic testing of the area adjacent to the weld seam for the detection of laminar imperfections.

• ISO 13919-1, Welding -- Electron and laser-beam welded joints -- Guidance on quality levels for imperfections -- Part 1: Steel.

• ISO 13919-2, Welding -- Electron and laser beam welded joints -- Guidance on quality levels for imperfections -- Part 2: Aluminium and its weldable alloys.

 

Relevant NDT SAE Specifications. SAE Society of Automotive Engineers. www.sae.org

• AIR4964: Exposure Levels of Uv Radiation in Nondestructive Inspection Processes.

• AIR4777: Nondestructive Inspection (Ndi) Methods Used During Production and Operation of Aircraft Wheels and Brakes.

• AMS2440: Inspection of Ground, Chromium Plated Steel Parts

• AMS2630: Inspection, Ultrasonic Product Over 0.5 Inch (12.7 Mm) Thick.

• AMS2632: Inspection, Ultrasonic, of Thin Materials 0.50 Inch (12.7 Mm) and Under in Cross-Sectional Thickness.

• AMS2641: Vehicle, Magnetic Particle Inspection, Petroleum Base

• AMS3158: Solution, Fluorescent Penetrant, Water Base

• AMS7295/8: Radiographic Paper, 2.5-80 (NONCURRENT Jan 1998)

• AMS7295/9: Radiographic Paper, 2.0-80 (NONCURRENT Jul 1998)

• ARP1333: Nondestructive Testing of Electron Beam Welded Joints in Titanium Base Alloys

• ARP4462: Barkhausen Noise Inspection for Detecting Grinding Burns in High Strength Steel Parts

• ARP5605: Solid Composite Laminate Ndi Reference Standards

• ARP5606: Composite Honeycomb Ndi Reference Standards

• AS1177: Nondestructive Inspection Standards for Bolts and Screws

• AS4792: Water Conditioning Agents for Aqueous Magnetic Particle Inspection

• AS7100/1: National Aerospace and Defense Contractors Accreditation Program (Nadcap) - Survey Checklists for the Ndt Suppliers Accreditation Program

• AS7114: National Aerospace and Defense Contractors Accreditation Program (Nadcap) Requirements for Nondestructive Testing

• AS7114/1: Nadcap Requirements for Nondestructive Testing Facility Penetrant Survey

• AS7114/2: Nadcap Requirements for Nondestructive Testing Magnetic Particle Survey

• AS7114/3: Nadcap Requirements for Nondestructive Testing Facility Ultrasonic Survey

• AS7114/4: Nadcap Requirements for Nondestructive Testing Facility Radiography

• J358: Nondestructive Tests

• J359: Infrared Testing

• J425: Electromagnetic Testing By Eddy Current Methods

• J427: Penetrating Radiation Inspection

• J428: Ultrasonic Inspection

• J1063: Cantilevered Boom Crane Structures-Method of Test

• J1267: Leakage Testing